Industrial Hygiene


Wholesale adoption of GHS hazard classsification principles will disrupt chemical hazard assessment programs and heighten problems manufacturers and importers will face.

Transform Tox Testing Challenge Under Way

The National Toxicology Program and partner agencies are behind the challenge, which will award $500,000 for ideas that help innovate current toxicity testing methods.

NIOSH Study Shows Scope of Illness Tied to Two Common Herbicides

Although most of the illnesses related to paraquat and diquat were low to moderately severe—health effects commonly included skin, eye, or neurological symptoms—these two herbicides make up 85 percent of herbicide-related deaths in the United States.

The bags make air grab sampling easy and efficient. (Nextteq photo)

Whole Air Sampling: No Pump, No Problem

Traditional grab sampling methods require supplementary devices such as electric pumps, batteries, charging devices, calibrators, tubing, connectors, and auxiliary equipment.

Infrared Sensors Shine a New Light on LEL Combustible Gas Measurement

It is critically important for instrument users to understand what the sensors in their instrument cannot properly measure, as well as what they can.

Theme Park Employees Exposed to Chemical and Fire Hazards: OSHA

Lake Compounce Theme Park of Bristol, Conn., faces $70,200 in fines.

ECHA Finds 22 Labs Ready for One-Generation Reproductive Toxicity Studies

ECHA performed a similar study in 2012 and now reports that global laboratory capacity to conduct the studies has increased. The latest study was triggered by the recent change in the REACH information requirements.

AIHA Welcomes Managing Director of Global Learning, Names Interim Executive Director

Mark Milroy began his position on Jan. 11, according to the association.

NIST Researcher's Kit Recovers Trace Chemicals

If it can be successfully commercialized by industry, detectives, field inspectors, and others could carry with them a convenient version of NIST's "headspace analysis" technique that identifies solid or liquid compounds based on the makeup of vapors released into the air.



NIOSH Skin Documents Focus on Dermal Exposures

There are 45 Skin Notation Profiles available on the NIOSH website.

Beryllium is an occupational respiratory hazard. It is a lightweight, strong metal used principally in the aerospace and defense industries, according to OSHA.

OSHA Sets Informal Hearing on Beryllium Rule

The agency published the proposed rule Aug. 7, 2015, and took comments through Nov. 5, during which the the Non-Ferrous Founders' Society requested that OSHA schedule an informal public hearing on it.

HSE Taking Comments on Harbor Hazmat Regs

The proposed regulations are relevant to anyone involved in the transport, storage, or handling of dangerous substances or goods in harbors and ports, including harbor authorities, stevedores, masters of vessels and their agents, shippers, and truck and rail operators, as well as anyone involved in loading or unloading explosives anywhere on the coast of Great Britain or in territorial waters.

Oregon OSHA will convene an expert panel to advise it on which PELs are most in need of updating, Administrator Michael Wood reported.

OR-OSHA's Chief Outlines PEL Update Plans

Administrator Michael Wood explained in Oregon OSHA's latest newsletter that the agency will encourage employers to consider more-protective limits and also will "tackle four to six of the most significant and outdated PELs on a state level."

OSHA Expects to Complete Silica Rule in February 2016

The final rule has been in development for more than 15 years. It would halve the current limit for general industry.

JOEH Publishes Supplement on Occupational Exposure Limits

The December issue of the journal includes a supplement addressing issues tied to the science of OELs.

The rule states that before an employee enters the space, the internal atmosphere must be tested with a calibrated direct-reading instrument for oxygen content, for flammable gases and vapors, and for potential toxic air contaminants.

Atmospheric Testing and the New OSHA Construction Confined Spaces Standard

Subpart AA of 29 CFR 1926 will help to prevent construction workers from being hurt or killed by eliminating and isolating hazards in confined spaces at construction sites.

Researchers Raise Toxicity Questions About 3D Printed Parts

Parts from two main classes of commercial 3D printers were found to be toxic to zebrafish embryos.

ECHA Taking Comments on Adding Lead Compounds to Authorisation List

The four lead compounds were included in ECHA's previous draft recommendation in 2014 but were not included in the final recommendation that was sent to the European Commission in July 2015. Comments on 11 proposed substances are due by Feb. 18, 2016.

AIHA Begins Partnership with South African IH Organization

AIHA announced it has signed a Memorandum of Understanding for technical cooperation with the Southern African Institute for Occupational Hygiene.

Only 80 of more than 600 exposure standards Australia has used since adopting them from ACGIH standards in the 1980s have been updated since then.

Australia Updating Chemical Exposure Standards

Safe Work Australia has asked stakeholders to submit comments by Dec. 18 about the existing standards for airborne exposures. Most were adopted from ACGIH standards in the 1980s and have never been updated.

AIHA Announces IH Professional Pathways Program

The program encourages and supports earning credentials for IH professionals.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. 3

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. 3

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. 3

Featured