"I would surely love to be able to rent a swimming pool, but now I am stuck owning one. When it comes to gas detection equipment, however, you do have a choice."

Is Gas Detector Rental Right For Me?

In addition to cost savings, an advantage to choosing rental over purchasing gas detectors is that it enables more accurate budgeting for projects.

When I married my wife, I also became a proud owner of a swimming pool. So you would think that I would be happy to see the summer months approaching, right? Wrong. It's actually quite the contrary. So far, it's been the same story every year. It starts with uncovering the pool, and then it quickly goes straight downhill from there.

The first step is to drain the smelly, stagnant, tadpole-filled water off the winter cover. And every year, the same thing seems to happen: There is a minuscule tear or hole in the cover that I cannot see. I place the water pump onto the cover and as I am waiting for the water to drain, I notice the water level gets to a certain point but never gets any lower. Hmm.... It is then that I realize the good water, which is underneath the cover, is now being sucked through the pump and sent through the waste line. Nice.

After I wrestle with the -- let's call it the "heavier than you think because it still has smelly, stagnant, tadpole-filled water on it" winter cover -- I finally get it pulled to one side of the pool and somehow remove it. By this time, I am usually covered in smelly, stagnant, tadpole-filled water.

After removing the smelly tadpoles from my ears, it's time to assess the water level in the pool and determine how many loads of water I will need to purchase from the local fire department. Next, it's time to buy chemicals and various pool supplies. After turning on the pump and praying that no leaks spring up, it's now time to vacuum the pool.

"Darn. The vacuum is broken!" Back to the pool supply store I go.

One month passes, and I finally have the pH and chlorine levels where they need to be. That required only six trips to the pool store and three loads of water. Then, I get my new electric bill in. "What?" I ask. "It costs how much to run that pump?"

Granted, I am a newer pool owner and do not have a vast knowledge about caring for a swimming pool. I'm sure I will learn more it in time, but I don't think I will ever become an expert. Since I live in Pittsburgh, Pa., my time spent taking care of the pool is limited. And after all of that, usually I don't end up having much time to sink into it anyway.

Choices, Choices
I would surely love to be able to rent a swimming pool, but now I'm stuck owning one. When it comes to gas detection equipment, however, you do have a choice.

Understandably, companies that have a need for gas monitors on site for everyday use should participate in a "total package" Gas Detection as a Service solution. But what about those instances when your need for the gas detection equipment lasts only a few days or a couple of months? In this case, it is more economical to rent gas monitors than to buy them.

A process shutdown at a plant is a common event in which gas detector rental would be ideal. This could be a turnaround at a refinery, a shutdown at a steel mill, or an outage at a power plant. During these processes, more or different types of gas monitors often are needed by the maintenance crew of that company or for use by the contractors who will be coming on site to do the work.

Another case in which renting gas detection equipment makes better sense is during a new process or experiment. For instance, an industrial hygienist wants to conduct a test, but the particular gas of concern is not within the plant's normal array of sensors. Why purchase a gas monitor for this short-term project and pay all of the maintenance costs that go along with it when you can rent for a fraction of the cost of ownership? In the unfortunate event of an accident or emergency, fire and hazmat crews are not always equipped with gas detectors that include the exotic gas sensors, such as chlorine, ammonia, and hydrogen chloride. It would be very costly to own and maintain a monitor with these sensors installed due to the price of the sensors and calibration gas associated with the exotic gases. Again, renting versus buying gas detectors is the wiser thing to do.

In addition to cost savings, an advantage to choosing rental over purchasing gas detectors is that it enables more accurate budgeting for projects. This is because rental costs are known ahead of time. If a piece of equipment is purchased and owned, all of the other costs associated with maintaining the units over time are unknown and unaccounted for. When the job is done and the rental units are sent back, the maintenance and upkeep costs are transferred back to the company that owns the equipment. Typically, gas detection equipment rental companies will absorb the normal costs associated with wear and tear, including sensor replacements, filters, faceplates, and pumps. These costs are not passed on to the rental customer. Some will even go so far as to send out replacement monitors the same day they are needed for rental monitors that go down while in service.

In summary, gas detector rental is a great option for applications that require short-term use of gas detection equipment. These could be instances where more equipment is needed to cover additional workers due to a turnaround, shutdown, or outage. There may be a need for a different type of gas monitor with sensors that are not typically used on a day-to-day basis. In an emergency when gas monitors are needed quickly, rental could be a sensible option.

So don't be a victim of smelly, stagnant, tadpole-filled water abuse! Contact the gas detection experts and see whether gas detector rental is right for you.

This article originally appeared in the June 2012 issue of Occupational Health & Safety.

About the Author

Jason Wright is the rental account manager at Industrial Scientific Corporation. He can be reached at jwright@indsci.com.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm 3

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

Featured

Webinars