Report Offers Lessons from the Oso Landslide

It recommends communicating landslide risks clearly and consistently to the public, implementing monitoring and warning systems, and making seismological recordings of landslides–especially large ones.

A report on the March 22, 2014, landslide in Oso, Wash., makes valuable recommendations for predicting and mitigating the damage caused by such slides. The Oso event occurred about 10:37 a.m. on a Saturday. It killed 43 people, making it the deadliest landslide in U.S. history, according to the report prepared by a team from The Geotechnical Extreme Events Reconnaissance Association and published July 22, two months after the team's field reconnaissance. The National Science Foundation supported their work.

Eerily, the last missing victim's body was located on the day the report was released, the Snohomish County Sheriff's Office reported.

The landslide was 7.6 million cubic meters in size, or about 270 million cubic feet, and the debris flow traveled more than half a mile across a river valley, destroying an entire neighborhood of about 35 single-family residences and covering a section of State Highway 530 with as much as 20 feet of debris. The report notes that the slope that collapsed had slid several times since the 1930s and is the site of an ancient landslide.

The team concluded it is unlikely that seismic activity triggered the landslide and three weeks of intense rain that immediately preceded it, perhaps more than 30 inches in March 2014, played a major role. It discusses additional factors, including the weakening and changing of the landslide mass by previous slides. "Given the size and depth of the landslide, if timber harvest practices did influence the landslide, it was through modification of the groundwater recharge regime rather than by any shallow-depth loss of root mass reinforcement," it states.

The report's recommendation section suggests communicating landslide risks clearly and consistently to the public, implement monitoring and warning systems, and making seismological recordings of landslides--especially large ones--to help in understanding failure sequences.

Visit www.geerassociation.org to read the full report.

This article originally appeared in the September 2014 issue of Occupational Health & Safety.

About the Author

Jerry Laws is Editor of Occupational Health & Safety magazine, which is owned by 1105 Media Inc.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. 3

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

Featured