The Golden Gate Bridge at 80

How fitting that one of the best-known symbols of the modern U.S. safety industry is adding stainless steel suicide prevention nets.

An iconic symbol of San Francisco, the Golden Gate Bridge turned 80 a few months ago. At about the same time, in May 2017, work began on a $211 million suicide deterrent system on both sides of the bridge. It took years to reach that point, officials said during a ceremony to mark the start of the stainless steel nets' construction.

How fitting that one of the best-known symbols of the modern U.S. safety industry—Edward W. Bullard developed the hard hats that Bridge Chief Engineer Joseph Strauss insisted be worn by construction workers on the job, according to the archives maintained by the Golden Gate Bridge Highway and Transportation District, www.goldengate.org—is adding these nets. There was also a safety net then beneath the entire bridge, a net that saved 19 men who became known as the Halfway-to-Hell Club, according to the archives. They explain that Bullard also designed a sand-blasting respirator helmet for use during construction and that workers used glare-free goggles, special hand and face cream to protect against the wind, and special diets to help fight dizziness.

Eleven workers did die during the work, 10 of them in a single incident when a section of scaffold fell through the net. "The industry norm at that time was that one man would die during construction for every million dollars spent," we're told in a great video about Strauss's safety focus during the construction of the $35 million bridge: http://www.youtube.com/watch?v=KLRCZAXfEa4.

"Joseph Strauss was the leading force behind seeing the Golden Gate Bridge become a reality, hands down. Strauss was the visionary, promoter, team builder, coordinator, and manager of the preliminary and final designs for the Span. He also led the construction of the Bridge, working with a team of engineers, architects, geologists, other professionals, and the many dedicated contractors and workers involved in the project," according to the district.

The suicide deterrent project started with detailed measurements prior to manufacturing of the stainless steel nets. Installation is slated to begin in mid-2018. Similar deterrent systems have been used around the world, but never on this scale, according to the district.

During the ceremony, U.S. Sen. Dianne Feinstein, D-Calif., called it "a net whose time has really come. Thirty-nine people died last year alone," she added. "What you're doing here today, what the Bridge is doing, what the taxpayers are doing, will hopefully turn that number to zero."

This article originally appeared in the August 2017 issue of Occupational Health & Safety.

About the Author

Jerry Laws is Editor of Occupational Health & Safety magazine, which is owned by 1105 Media Inc.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. 3

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. 3

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" 3

Featured