NIOSH, OSHA Release Guidance on Ototoxicity

Some ototoxic chemicals may exacerbate noise-induced hearing loss even though the noise level is below OSHA’s PEL, the document warns.

A document posted by NIOSH on March 15, 2018, and credited both to NIOSH and OSHA offers guidance for preventing hearing loss that is caused by ototoxic chemicals and noise exposure.

DHHS (NIOSH) Publication Number 2018-124, a Safety and Health Information Bulletin, lists five examples of substance classes of ototoxic chemicals:

  • pharmaceuticals
  • solvents
  • asphyxiants
  • nitriles
  • metals and compounds

Mercury compounds and lead are among the chemicals listed in the metals and compounds class. The asphyxiants listed include carbon monoxide, tobacco smoke, and hydrogen cyanide and its salts.

"There is growing concern among occupational health and safety professionals that ototoxicant-induced hearing loss may go unrecognized since the measure for hearing loss does not indicate the cause," the five-page document states. "For example, audiometric tests are powerful tools that show hearing impairments (i.e., threshold shifts); however, they do not differentiate between noise and ototoxic causes."

It points out that harmful exposure to ototoxicant chemicals can occur through inhalation, ingestion, or skin absorption. Workers’ risk of hearing loss is increased when they’re exposed to the chemicals while working around elevated noise levels, it says, adding that the hearing loss may be temporary or permanent, depending on the level of noise, the dose of the chemical, and the duration of exposure, and such impairment affects many industries and occupations, from machinists to firefighters.

"Several studies have suggested that some ototoxic chemicals, such as certain solvents, might exacerbate noise-induced hearing loss even though the noise level is below OSHA's Permissible Exposure Limit (PEL)," it says.

The document relies on and cites a 2009 literature review from the European Agency for Safety and Health at Work, “Combined Exposure to Noise and Ototoxic Substances.” This 62-page resource contains a table of chemical agents, described as major sources of exposure, and their major uses by industry; the chemicals include toluene, styrene, trichloroethylene, n-Hexane, mercury, manganese, arsenic, and cadmium.

Industries More Likely to Have Ototoxicants
Industries that use potential ototoxicants include manufacturing, mining, utilities, construction, and agriculture. Manufacturing industry subsectors in which they are used, according to the guidance document, may include:

  • Fabricated metal
  • Machinery
  • Leather and allied products
  • Textile and apparel
  • Petroleum
  • Paper
  • Chemicals (including paints)
  • Furniture and related products
  • Transportation equipment (e.g., ship and boat building)
  • Electrical equipment, appliance and component (e.g., batteries)
  • Solar cells

It says work activities that often have high noise exposure and could add synergistic effects—defined in this document as a "greater-than-additive" effect—when combined with ototoxicant exposure may include:

  • Printing
  • Painting
  • Construction
  • Manufacturing
  • Firefighting
  • Firing weapons
  • Pesticide spraying

Preventing Harm
The guidance document recommends reviewing the Safety Data Sheets to identify ototoxic substances or chemicals—specifically Section 11 of an SDS that addresses toxicological information. The OSHA Hazard Communication Standard requires employers to provide training to workers who are exposed to hazardous materials, including ototoxic chemicals.

The next steps recommended in the document follow the familiar hierarchy of controls, beginning with elimination or substitution before moving on to administrative controls (such as eliminating unnecessary tasks that cause noise or ototoxicant exposure or operating noisy equipment when employees aren't near it) and PPE (such as respiratory protection, chemical-protective gloves, sleeves, aprons, and hearing protection).

This article originally appeared in the May 2018 issue of Occupational Health & Safety.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. 3

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. 3

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. 3

Featured

Most   Popular